Phone: 636.926.9000
  Fax: 636.926.9955

  Phone: 636.926.9000
  Fax: 636.926.9955

830 Westwood Industrial Park Dr  
Weldon Spring, MO 63304  
sales@tubularusa.com  

830 Westwood Industrial Park Dr  
Weldon Spring, MO 63304  
sales@tubularusa.com  

 Bending

When it comes to bending a tube there are many ways to do it. Typically the end-use and expectations of the bend determine what method is most practical. Below are some of the things to take into consideration when determining what type of bender to use. If you need tube bent, please call us, we can handle it all.

  1. Volume of parts
  2. Number of bends per part
  3. Number of bend-planes per part
  4. Is deformation in the bend radius allowable
  5. Are tool marks an issue
  6. Is the bend radius less than 2 ½ times the tube diameter
  7. Diameter and wall thickness of tube being bent
  8. Material hardness
  9. Degree of bend(s)

 

When it comes to bending a tube there are many ways to do it. Typically the end-use and expectations of the bend determine what method is most practical. Below are some of the things to take into consideration when determining what type of bender to use. If you need tube bent, please call us, we can handle it all.

  1. Volume of parts
  2. Number of bends per part
  3. Number of bend-planes per part
  4. Is deformation in the bend radius allowable
  5. Are tool marks an issue
  6. Is the bend radius less than 2 ½ times the tube diameter
  7. Diameter and wall thickness of tube being bent
  8. Material hardness
  9. Degree of bend(s)